Black winding cone torsion springs are used on the right side of the door and red winding cone torsion springs are used on the left side of the door when viewing the door from the inside looking out.
One of the unique features of a classic Mopar is the front torsion bar used in place of the commonly used coil spring front suspension.
installation instructions qa1 p/n 52360 torsion bar adjusters 1964-1976 mopar a-body, 1962-1972 mopar b-body, 1970-1974 mopar e-body read all instructions carefully and thoroughly prior to starting installation. Shocks are double adjustable, and the factory torsion bars are retained as this apron is not designed to support the weight of the car, so coilover shocks are not available from QA1 for this application.
Improved shock technology, needed with thicker torsion bars, upgrade the handling of a ’60s/’70s Mopar greatly. The lighter torsion bars your car originally came with make for great weight transfer at the drag strip, but a handling nightmare on the street. Getting a more personalized or stock look with a Torsion Bar Adjustment. INSTALLATION INSTRUCTIONS QA1 Mopar K-Member P/N 52313, 52314, 52315 READ ALL INSTRUCTIONS CAREFULLY AND THOROUGHLY PRIOR TO STARTING INSTALLATION. ... Mancini Racing Enterprises - Good pricing on all Mopar performance parts, torsion bars, etc. Upper control arm installation is a direct replacement for the factory control arm, and bolts in with the factory camber bolts or QA1's kit. CLICK HERE . Improve the suspension performance and increase cornering ability or weight transfer of your vehicle with these Mopar Performance Parts torsion bar sets. Mopar Performance Parts offers torsion bars for "A", "B", and "E" body cars in a variety of diameters for restorations, performance and racing.
you will need to remove the skid plate that is near the torsion bar bolt and Keys, Jack the front of the truck all the way off the ground and make sure you put jack stands under the truck for safety and rest the truck on the stands with the front tires still off the ground to take some of the pressure off of the torsion bars. Torsion Bars. 2.
Milodon - Specializing in performance oil ... tech info, installation tips, and more! The torsion bars have an adjuster which allows control of the front end ride height without replacing any parts.
CUSTOMER'S RIDES AND HDK SUSPENSION PRODUCTS PHOTO GALLERY. Clock the torsion bar keys and re-install the torsion bars and snap rings. Chrysler Torsion Bar Car Suspensions, 1957-1992: Torsion-Aire, Torsion-Quiet. The K-member may need to be adjusted in the Below is a list of all available instructions for Sway-A-Way products. But, in my opinion, these days, normal “modern day” streethandling make torsion bar rates of 200+ pretty much the ‘default’ application for V8 powered A-B-E body Mopars. Failure to install the torsion springs on the correct side will cause your door to … CLICK HERE. 9902 – VW Ball Joint & Link Pin Front Adjusters Instruction PDF 9904 – Link Pin Bushings & Shims Instruction PDF 9905 – VW Rear Quick Adjusters Instruction PDF 9906 – VW Ball Joint Leaf Springs Instruction PDF 9906 – Axle Length Measurement Instructions […] products that have been installed are not eligible for return.
HEMI Denny suspensions featured in top industry magazines. CLICK HERE. If your motor is in the vehicle, install an engine bridge above the motor, resting it on the upper shock towers. SWAY BARS HELPER SPRING AIR SUSPENSION Welcome to Hellwig Hellwig Products has been manufacturing high quality, innovative load control and sway control solutions for domestic and foreign trucks, RV’s, muscle cars, classic cars and fleet vehicles since 1946. MOPAR "E" BODY Front Suspension Kits For Street And Strip • 70-74 Barracuda • 70-74 Challenger • LEARN MORE > Prev Next . use the proper jacking locations.
... SUPPORT AND INSTALLATION INSTRUCTIONS. This will enable you to raise your motor slightly so suspension can be removed. No matter what your application is, Hellwig Products has a way to make it handle better or tow […]